Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 1 × 2 × 1 in |
Hose End Fitting 1 ½ ID – Cooler
Hose End Fitting 1 ½ ID – Cooler
$11.00
In StockRelated products
-
MotorsportsTemperature Control Switch
Download InstructionsCOOLSHIRT ® temperature control switch is specially designed to allow individual speed control settings for the internal pump of popular Pro System 13 or 19.
$245.00 Add to cart -
MotorsportsMotorsports Drain Kit
Download InstructionsSKU: 5006-0003
The COOLSHIRT drain kit is designed to make draining your shirt and/or cooler quick and easy. The kit comes with 2 female connectors and 1 male connector with roughly two feet of tubing.
To drain your garment just connect the female connectors to it and hang the garment to allow it to gravity drain. We recommend that you leave the female connectors in the shirt after it has drained for several hours to allow any excess moisture in the tubes to evaporate. If needed, you can blow a light stream or air (10psi or less) through the garment to aid in the draining process.
The male connector and tubing will allow you to plug into the cooler and pump the water out. We recommend that you leave the cooler lip open after pumping the cooler out to allow for any excess moisture to evaporate.
$36.00 Add to cart -
MotorsportsDry-Cool Air System (add on)
Download InstructionsThe COOLSHIRT® Dry-Cool Air System is an add on component that can be added in series to any water cooled system to provide the option of cool air to the helmet.
Using an independent fan system to draw outside air through an aluminum heat-exchanger, the 235 CFM fan is provides hours of cool air when needed.
Add an optional FC-1 switch to control the fan speed or install with an in-line toggle switch to turn the fan on and off.
$590.00 Add to cart