The COOLSHIRT® Pro Air & Water System delivers temperature-controlled cooled water to the driver’s COOLSHIRT and cooled blower-enhanced HEPA-4 filtered air to their helmet.
Also available with the SFI-Approved FireWear® fire-retardant COOLSHIRT. The COOLSHIRT Pro Air & Water System comes with a 13 or 19 quart cooling unit with an internal pump that supplies temperature-controlled cool water to the shirt and HEPA-4 filtered, chilled air to your helmet via a 235 CFM blower.
Twelve feet of double insulated water hose with automatic shutoff/quick disconnects attach the shirt to the unit, and the Dual Temperature Control Switch allows the user to regulate the flow and the temperature of water for personal comfort based on external temperature variation.
Emergency pull release standard on all racing products.
Compatible with All CoolSuits and Cooling Suits
MAXIMUM VOLTAGE: 12V. Greater voltage will void warranty.
The COOLSHIRT drain kit is designed to make draining your shirt and/or cooler quick and easy. The kit comes with 2 female connectors and 1 male connector with roughly two feet of tubing.
To drain your garment just connect the female connectors to it and hang the garment to allow it to gravity drain. We recommend that you leave the female connectors in the shirt after it has drained for several hours to allow any excess moisture in the tubes to evaporate. If needed, you can blow a light stream or air (10psi or less) through the garment to aid in the draining process.
The male connector and tubing will allow you to plug into the cooler and pump the water out. We recommend that you leave the cooler lip open after pumping the cooler out to allow for any excess moisture to evaporate.