“ The ProCool R is a packaged deal. Simple install, a flick of a switch cooling, low maintenance and no ice. This is certainly a premium cooling product for drivers looking to better regulate their body temperature and comfort within the cockpit. The added advantage for me was singular focus; just driving. With the ProCool R your body is constantly regulated at a safe temperature therefore you’re never losing focus because of intense heat.” – Shea Holbrook, Professional Racer
Compatible with all existing COOLSHIRT branded shirts
Operates using a 12V power source
Includes water hose
Able to pre-cool in under 5 minutes
Produces 300 watts of cooling
Able to cool up to 50 degrees F below ambient temperature in high heat conditions
The COOLSHIRT drain kit is designed to make draining your shirt and/or cooler quick and easy. The kit comes with 2 female connectors and 1 male connector with roughly two feet of tubing.
To drain your garment just connect the female connectors to it and hang the garment to allow it to gravity drain. We recommend that you leave the female connectors in the shirt after it has drained for several hours to allow any excess moisture in the tubes to evaporate. If needed, you can blow a light stream or air (10psi or less) through the garment to aid in the draining process.
The male connector and tubing will allow you to plug into the cooler and pump the water out. We recommend that you leave the cooler lip open after pumping the cooler out to allow for any excess moisture to evaporate.